Lumatek 400/250W Dual Volt HPS/MH Dial-A-Watt Dimmable E-Ballast

$189.95 $149.95
Quantity:

in stock

More lumens generated per watt of electricity consumed – Lumatek ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 99%+. The high frequency output results in low power loss.

Operates in 4 Modes:

400 Watt SUPER LUMENS Mode:

  • Will run 400 Watt bulb using 400 Watts of electricity.

Compatible Bulbs that can be run on 400 Watt SUPER LUMENS Mode:

  • 400 Watt High Pressure Sodium (HPS)
  • 400 Watt Metal Halide (MH)

 

400 Watt Mode:

  • Will run 400 Watt bulb using 400 Watts of electricity.
  • All bulbs running on 400 Watt Mode will use 400 Watts of electricity and put out 400 watts of light. (Example: 400 Watt bulb used in 400 Watt Mode, 400 Watts used, 400 Watt Light output)

Compatible Bulbs that can be run on 400 Watt Mode:

  • 400 Watt High Pressure Sodium (HPS)
  • 400 Watt Metal Halide (MH)

 

250 Watt SUPER LUMENS Mode:

  • Will run 250 Watt bulb using 250 Watts of electricity.

Compatible Bulbs that can be run on 250 Watt SUPER LUMENS Mode:

  • 400 Watt Metal Halide (MH)
  • 400 Watt High Pressure Sodium (HPS)
  • 250 Watt Metal Halide (MH)
  • 250 Watt High Pressure Sodium (HPS)

250 Watt Mode:

  • Will run 400 or 250 Watt bulb using 250 Watts of electricity.
  • All bulbs running on 250 Watt Mode will use 250 Watts of electricity and put out 250 watts of light. (Example: 400 Watt bulb used in 250 Watt Mode, 250 Watts used, 250 Watt Light output)

Compatible Bulbs that can be run on 250 Watt Mode:

  • 400 Watt Metal Halide (MH)
  • 400 Watt High Pressure Sodium (HPS)
  • 250 Watt Metal Halide (MH)
  • 250 Watt High Pressure Sodium (HPS)

 

Features:

  • More lumens generated per watt of electricity consumed – Lumatek ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 99%+. The high frequency output results in low power loss.
  • Fast start-up – they reach full brightness quickly.
  • Completely silent.
  • Small compact design.
  • Produce less heat.
  • Cut-off circuitry – cuts off when a short is detected for ultimate safety.
  • Fully interchangeable – Lumatek ballasts can light both HPS and MH bulbs.
  • Compatible with Smart Volt power cords.
  • 120/240 Volt.

Ballasts, Electronic & Digital, Lighting, Lumatek Ballasts


Leave a Reply

Related Products